Axial Lead Resistors
WIRE WOUND RESISTORS – AXIAL TERMINATIONS
VPA Series
Features:
- WATTAGES FROM 0.5 WATT TO 15 WATTS
- RANGE FROM 0.01Ohm TO 120Ohm
- SILICONE/FLAME RETARDANT COATED
- NON INDUCTIVE ARYTON- PERRY WINDING TYPE AVAILABLE
- ANY SPECIAL DESIGN ON REQUEST
- HIGH VOLTAGE PULSE RESISTORS AVAILABLE
- ALL WELDED CONSTRUCTION
Charactaristics:
| Tolerance | ±1%, ±2%, 5% , & 10% |
| Temperature coefficient | ±200 PPM / °C |
| Power dissipation | Rated at 70°C Ambient and derated linearly to Zero power at 350°C |
| Load life stability | ±5% full load dissipation for 1000 hrs |
| Maximum Voltage | Where P = Power in watts, R = Resistance in ohms |
VPAF Series
Features:
- Wattage from 0.5W to 15W
- Range from 0.01 Ohm to 100K Ohm
- Flame Retardant
- Available in Non-Inductive type(upto 50K Ohm only)
- Available in closure tolerances
- Designed for High Voltage Pulse application as per IEC 61000-4-5
- Designed and approved as per JSS 50402 (RFHT 1) / IS 8909
- RoHS Compliance
Charactaristics:
| Tolerance | ±1%, ±2%, 5% , & 10% |
| Temperature coefficient | ±200 PPM / °C |
| Power dissipation | Rated at 70°C Ambient and derated linearly to Zero power at 350°C |
| Load life stability | ±5% full load dissipation for 1000 hrs |
| Maximum Voltage | Where P = Power in watts, R = Resistance in ohms |
VPAFS Series
Features:
- WATTAGES FROM 1 WATT TO 5 WATTS
- RANGE FROM 0R1 OHM TO 3K3 OHM
- FLAME RETARDENT
- FUSIBLE RESISTOR
- ANY SPECIAL DESIGN ON REQUEST
Charactaristics:
| Tolerance | ±1%, ±2%, 5% , & 10% |
| Temperature coefficient | ±200 PPM / °C |
| Short time overload | 5 times rated power for 5 seconds seconds |
| Load life | ±5% (after full load dissipation of 1000 hrs. ) |
| Solderability | Smooth Surface lead up to 95% |
| Insulation | 500 Mega Ohm at 500 V DC |
| Maximum voltage | PR Where P = Power in Watts, R= Resistance in Ohms |
VPP Series
Features:
- WATTAGES FROM 0.25 WATT TO 2 WATTS
- RANGE FROM 0.1Ohm TO 100K Ohm
- ALL WELDED CONSTRUCTION
- SILICONE / FLAME RETARDANT COATED
- NON – INDUCTIVE ARYTON – PERRY WINDING TYPE AVAILABLE
- ANY SPECIAL DESIGN ON REQUEST
Charactaristics:
| Tolerance | ±0.5% 0R1 – 0R9 ±0.1% 1R – 99R9 ±0.05% 100R – 100K ±0.01% 100R – 100K |
| Temperature coefficient | ±10PPM/ºC |
| Power dissipation | Rated at 40ºC and derate linearly to 0 power at 155ºC |
| Load life stability | ±0.01% (after full load dissipation for 1000 hrs.) |